Sanyo DVD-L77 User Manual

1.1  TV SYSTEM  - It is used to select the TV mode.
Options:  NTSC / PAL/ AUTO
Please select this option as per your area or TV set.

 SCREEN SAVER - When the player is not in use for 3 

minutes, a running DVD logo will move across the TV 
screen to protect an external screen.

         Options: On: Screen saver is enabled
                         Off: Screen saver is disabled

1.3 TV TYPE- It is used to select the TV scan mode, 

please  set as per your TV set, if an external TV is 
connected.

Options:  4:3PS : Normal Pan & scan mode
               4:3LB : Normal Letter box mode
               16:9 :    16:9 wide screen mode

1.4 PASSWORD - Input password to unlock the system. 

The steps are as follows:

1.4.1 Enter SYSTEM SETUP, select the PASSWORD item 

by scrolling the down navigation button, and then press 
the right navigation button to select the input box.

1.4.2 Input user's password "0000" to unlock it, in this case, 

select the input box again to change the password by 
inputting another new four numeric numbers and then 
press SELECT button to confirm. When the password 
is changed, you are needed to input the new one to 
unlock the system.

1.4.3 If you forget your own password, enter "8200" to     
       unlock it.
NOTE: If wrong password was input in unlock status, the 

system will lock. 

1.5 RATING - Set the rating of this player. If you want to      

change the rating of parental lock, please input the 
password to unlock first.

Options: 1  KID SAFE/2  G/ 3  PG/ 4  PG 13/ 5  PG-R/ 6R/7  

NC-17/ 8  ADULT

1.6 DEFAULT - Reset to factory settings.

2.1 OSD LANGUAGE - It is used to select different On Screen 

Display language for different user.

Options: ENGLISH    JAPAN
(The number of these options depends on the customer's need.)
2.2 AUDIO LANG - 

Select preferred audio language (DVD 

only, need disc software support).

Options: ENGLISH/SPANISH/PORTUGUESE/ITALIAN/ 

3.1 AUDIO OUT -  Set digital output code format.

Options:  
SPDIF/OFF: I

f you are not connecting to an amplifier via 

digital output, please select this option.

Used in general home theatre, select this can 

output 5.1 channels audio.

SPDIF/PCM: S

elect this it can only output 2 channel, but you 

will get higher quality audio output.

4.1 BRIGHTNESS-- to set the brightness for the display.
      Options: 0/2/4/6/8/10/12
4.2 CONTRAST--to set the contrast effect for display.
      Options: 0/2/4/6/8/10/12
4.3 HUE--to set the colour impression for display.
      Options: -6/-4/-2/0/+2/+4/+6
4.4 SATURATION--to set the saturation level for display.
      Options: 0/2/4/6/8/10/12

5.1 DOWNMIX 

Options: LT/RT- Left/Right mix mode

               STEREO- Select this option if  you don't   

                                  have a 5.1 channels amplifier.

               

2.3 SUBTITLE LANG- Select preferred subtitle language
      (DVD only, need disc software support).

Options: ENGLISH/SPANISH/PORTUGUESE/ITALIAN/ 

2.4 MENU LANG - Select preferred disc menu language
      (DVD only,  need disc software support).

Options: ENGLISH/SPANISH/PORTUGUESE/ITALIAN/