Saeco Coffee Makers Dehumidifier DEU001H User Manual

The condensation may be drained directly into an appropriate
drainage point by means of a pipe that is supplied with the unit.
To activate this option proceed as follows:

• remove the rubber cap (8) (Fig.Z1) situated at the side of the

unit and keep it in a safe place;

• open the filter holder grid (3) (Fig.Z1) and slide the condensation

collection tank out (4);

• remove the insert (11) (Fig.Z2) that deactivates the anti-drip

device from the condensation collection tank and keep it in a
safe place;

• insert the pipe (Fig.9) (Fig.Z3) in the joint after having passed it

through the hole, being careful to manually move the anti-drip
device (12)

• re-insert the condensation collection tank (4) (Fig.Z4) and close

the filter holder grid (3)

To restore drainage into the condensation collection tank,
proceed as follows:

• open the filter holder grid (3) (Fig.Z7) and remove the

condensation collection tank (4);

• carefully slide the tube (9) (Fig. Z8) out of the joint, being careful

to manually move the anti-drip device (12) (Fig.Z8);

• position the insert (11) (Fig.Z9) in the condensation collection

tank (4);

• replace the rubber cap (8) (Fig.Z10) in the casing of the

dehumidifier

• re-insert the condensation collection tank (4) (Fig.Z10) and

close the filter holder grid (3).