Brother FAX-2000P Owner's Manual
Chapter 2
16
How to load envelopes and post cards
2
a
Before loading, press the corners and
sides of the envelopes or post cards to
make them as flat as possible.
sides of the envelopes or post cards to
make them as flat as possible.
Note
If the envelopes or post cards are ‘double-
feeding,’ put one envelope or post card in
the paper tray at a time.
feeding,’ put one envelope or post card in
the paper tray at a time.
b
Put the envelopes or post cards into the
paper tray with the address side down
and the leading edge as shown in the
illustration in first as shown in the
illustration. Slide the paper side guides
(1) and paper length guide (2) to fit the
size of the envelopes or post cards.
paper tray with the address side down
and the leading edge as shown in the
illustration in first as shown in the
illustration. Slide the paper side guides
(1) and paper length guide (2) to fit the
size of the envelopes or post cards.
If you have problems when printing on
envelopes, try the following
suggestions:
envelopes, try the following
suggestions:
2
a
Open the envelope flap.
b
Make sure the open flap is either to the
side of the envelope or to the back edge
of the envelope when printing.
side of the envelope or to the back edge
of the envelope when printing.
c
Adjust the size and margin in your
application.
application.
Removing small printouts
from the machine
from the machine
2
When the machine ejects small paper onto
the output paper tray you may not be able to
reach it. Make sure printing has finished, and
then pull the tray completely out of the
machine.
the output paper tray you may not be able to
reach it. Make sure printing has finished, and
then pull the tray completely out of the
machine.
1
2