Samson Pro Rack-Mount Power Distribution PB15 User Manual

4

PowerStrip PS15 Front Panel
1:   Circuit breaker- This circuit breaker will trip whenever the total load on the PS15 

(all rear panel switched outlets plus the front panel unswitched convenience 

outlet) exceeds 15 amps.  To reset it, unplug one or more devices so as to reduce 

the load and gently press the circuit breaker in until you hear it click. 

 

Note: It may take a minute to cool before you can reset it.

2.   Vent - Convection cooling is accomplished by the front panel vent holes.
3:   Unswitched convenience outlet- This 3-pin AC outlet is active whenever the 

PS15 is plugged in, regardless of the setting of the Outlets switch (see #4 below).

4:   Outlets switch- Use this to turn the rear panel outlets on or off.  When on, the 

status light inside this switch is lit red.