Manualsbrain.com
  1. Manuals
  2. Brands
  3. Rocketfish
  4. RF-RBAUX
  5. Leaflet

Rocketfish RF-RBAUX Leaflet

Download
Page of 2
QUICK SETUP GUIDE
QUICK SETUP GUIDE
SPEAKER-OUT (4-8 Ohm)
09-0476
Step 3 Establishing communication
To power on and switch to joining mode:
1 Press and hold the      button on the hub unit (the hub will be identified by a solid green power LED or flashing green if there 
    are no other devices connected to the network) for more than three  seconds to  put  the unit into joining mode. 
     The unit will stay in joining mode for about 30 seconds.
    • The Power/Join indicator starts blinking fast.
2 Press and hold the     button on the Rocketfish receiver for more than 3 seconds to put the unit into joining mode.   
         
    The unit will stay in joining mode for 30 seconds.
    The Power/Join  indicator starts blinking quickly. When connected, both units will show a solid LED for successful connection. 
   
 
• If the Power/Join  indicator blinks at a slower rate, the link is not successful. Retry the joining operation.
    See your User Guide for additional information.
SPEAKER-OUT (4-8 Ohm)
R
L
120V~,60Hz
AC IN
Step 2 Connecting the receiver
Connect the right surround 
speaker to the right speaker 
terminal of the receiver, using 
the supplied three-foot speaker 
cable.  Connect the red
speaker cord to the red (+)
 
terminals, and the black speaker 
cord to the black (-) terminals.
Repeat to connect the left 
speaker.
TM
Please read before setting up your system.
Every Rocketboost network must contain at least one hub device, which directs network data traffic and helps devices 
join the network. The network can have only one hub, which can be enabled by using the hub switch on the back of all 
Rocketboost transmitters. See your User Guide for
 
instructions on joining devices to the network.
Step 1 Preparing the remote control
To activate the battery:
 Remove the tab from the bottom of the remote control to enable the battery.
 
TM
9
10
R
L
120V~,60Hz
AC IN
11
1   Standby LED 
2   Power/Join button 
3   Power/Join indicator
4   Bass button
5   BASS indicator 
6   SOURCE indicator  
7   SOURCE button  
8   HD indicator 
9   IR sensor 
10 VOLUME knob 
 
Receiver
1
2 3
12
13
14
11 Removable cable spool slot
12 AC IN connector
13 Removable cable spool slot 
14 SPEAKER OUT jacks 
5
4
8
7
6
SPEAKER-OUT (4-8 Ohm)
Package contents:
Wireless receiver
IR remote 
AC cable 
User Guide Cable spool 
3 ft. speaker cable (2) 
Quick Setup 
QUICK S
ETUP GUIDE