Ricoh TRC-239 User Manual

10

might be available are: municipal curbside collection,
drop-off boxes at retailers such as your local Ra-
dioShack store, recycling collection centers, and
mail-back programs.

You can power the TRC-239 from a vehicle’s 12V
power source (such as cigarette-lighter socket) using
a fused DC power cord that ends in a size M Adapta-
plug

® 

adapter (neither supplied). Both are available

at your local RadioShack store.

You must use a power source that
supplies 13.8 volts (12-volt nominal) at
1300 mA. Its center tip must be set to

positive and its plug must fit the TRC-239's

  jack. Using a power source that does

not meet these specifications could damage the
TRC-239 or the power cord.

• Always connect the fused power cord to the

TRC-239 before you connect it to the power
source. When you finish, disconnect the fused
power cord from the power source before you
disconnect it from the TRC-239.

If batteries are installed, make sure 

 inside the

battery compartment is set to the correct position
(see “Using Batteries” on Page 7). 

21-1628.fm  Page 10  Tuesday, January 25, 2000  9:30 AM