Sanyo CLT-D6614 User Manual

30

You have four handsets, therefore, you can enjoy an intercom call between

handsets. You can also establish a conference call (between two handsets and 

outside).    
 

The handset and base unit are factory pre-registered with each other. Handsets 

are numbered 1 to 4. Therefore, the unit should be in full working order out of the 

box. 
If your handset is not registered to the base "NOT REGISTERED" will display on 

the handset. The handset must first be registered to the base to be used.
To.register.a.new.handset:
1.  Touch

and select the SECURITY SET menu and then the  

  REGISTRATION submenu.
2.  Use 

.or.

.to select the base number you wish to register to. 

3.  Touch 

.to confirm.

4.  Enter the 4 digit PIN code (default 0000) and touch 

, you will see the

  message: 'REGISTERING'.
5. Press and hold the PAGE key on the base until the Charge/In use LED    

  flashes.  
6.  ‘REGISTRATION ACCEPTED’ indicates that handset is registered.  

 

  ‘RETRY?’ indicates that registration has failed. Touch 

to retry or

to

  quit.
To.select.a.base.unit.on.your.handset:
Your telephone supports up to 4 base units. After you register 1 handset to 4 

base units, bases are numbered 1 to 4, you may select which one to use.   
1.  Touch

and select the SECURITY SET menu and then the SELECT  

  BASE submenu.
2.  Use 

or

 to select the base number or ‘AUTO’ (automatically selects  

  the nearest base).
3.  Touch 

.to confirm.

4.  ‘ACCEPTED’ indicates that base has been selected. ‘RETRY?’ indicates   
  that selection has failed. Touch 

to retry or

 to quit.