Sanyo CLT-D6614 User Manual

38

The Ringer Equivalence Number

(REN) assigned to each terminal’s 

device provides an indication of the

maximum number of terminals

allowed to be connected to a

telephone interface.
The REN number of this phone is

located on the bottom of the base

unit. The termination on an interface 

may consist of any combination

of device subject only to the

requirement that the sum of the

Ringer Equivalence Numbers of all

the devices does not exceed 5.

This product is intended for use in the

USA and CANADA only. Sale or use 

in other countries may violate local

laws.
Cordless telephones use radio

frequencies to allow mobility. This  

affects the performance of your

phone.

To maintain compliance with the

FCC’s RF exposure guidelines it is 

recommended a typical distance at

least 0cm is maintained between the

base unit and nearby persons.

Electrical pulse noise is present in

most homes at one time or another. 

This is most intense during electri-

cal storms. Certain kinds of electrical 

equipment, such as light dimmers,

fluorescent bulbs, motors, fans, etc., 

also generate pulse noise.
Because radio frequencies are

susceptible to this, you may on

occasion hear pulse noise through

the handset. This is usually only a 

minor annoyance and should not be

interpreted as a defect of the phone.

Because radio frequencies are used,

the location of the base station can

affect the operating range of the

phone. Try several locations and 

choose the one that gives the clear-

est signal to the handset. Generally, 

a central area on the highest floor 

in a multi-floor residence yields best 

results. 

Electronic circuits activate a relay to

connect the unit to your telephone

line.  These electronic circuits  

operate in the radio frequency

spectrum. While several protection 

circuits are used to prevent unwanted

signals, there may be periods when

these unwanted signals enter the

base station. You may hear a click or 

hear the relay activate when you are

not using the cordless handset. If this 

occurs frequently, or relocating the

base station.  

 

The term "IC:" before the radio 

certification number only signifies 

that Industry Canada technical