Sharp Digital Signage Software Viewer PNSV01 User Manual

A list of panel control commands will be displayed.

There are two categories: “Command Name” and “Input Source”. Commands are as follows:

Turn On Display *

1

Turns the panel (monitor) power ON.

Turn Off Display

Puts the panel (monitor) into standby mode.

Switch Input Source 
(Input “No.”)

Switches the panel (monitor) input source.

TV *

2

Switch the input source of the panel (monitor) to “TV input”. The channel at the
time of switching to the TV cannot be specified. The channel that was selected by
the TV immediately before switching is displayed.

*1  It cannot be used with the LB-46GX35 and LB-52GX35.
*2  It cannot be used with the SHARP LCD monitor (PN series) and the LB-1085.

 • The commands supported by the panel (monitor)

can be checked with “Table of supporting panel
controls.”

 

• To display “Table of supporting panel controls,”

click the button (

) “About Panel Support” at the

lower left of the panel control command list. Or, click 
[About Panel Support] from [Help Menu].

The contents of “Table of supporting panel controls” are as follows:

RC-232C

Indicates the cable to be used for the connection (straight cable or cross cable).
Indicates transmission speeds supported.

LAN

Indicates whether LAN connection is supported.

Turn On

Indicates whether the “Turn On Display” panel control command is supported.

Turn Off

Indicates whether the “Turn Off Display” panel control command is supported.

Get Status

Indicates whether Get Status (Fp.101) is supported.

H/W Error Detection

Indicates whether IDP hardware error detection is supported.

Time Synchronization

Indicates whether Time Synchronization (Fp.91, 92) is supported.

Input “No.”

Indicates which input of the panel (monitor) is supported.

TV

Indicates whether TV input is supported.