Sampo DVE-6xx User Manual

 

14

You can choose to send the player’s audio signals to an 

external receiver using the following outputs: 

1  Analog: Audio signals are sent using Dolby Digital 5.1 

channel audio terminals (5.1ch model Only) and 

stereo audio terminals.  Selecting this choice will 

disable the digital audio outputs. 

1  Digital: Audio signals are sent using the optical output 

and the coaxial output.  Selecting this choice will 

disable the analog outputs. 

 

 

 

 

 

 

 

 

 

 

 

 

 

1  The unit has two video output choices, Y/Cb/Cr 

Component video and S-video. If you are using 

component video outputs, please set this setting to 

“Y/CB/CR”.  If you are using S-Video output, please 

set this setting to “S-Video”. If you are using composite 

video outputs, you can ignore this setting. 

i  Component video output and S-Video output can not 

be used simultaneously. 

 

 

 

 

 

 

 

 

 

 

 

 

 

This DVD player has only one SCART terminal but 

supports three different types of video output from this 

terminal. They are composite video, RGB video, and 

S-video, which are dedicated by setting SCART OUT at 

"COMPOSITE", "RGB", and "S-VIDEO", respectively. 

 

 

 

 

 

 

 

 

 

 

 

 

 

If a DVD box contains a  CC mark, you can set Closed 

Captioning to “ON” and read written captions on the TV 

screen. You must also have a TV that supports the caption 

function and have the function turned on. 

 

 

 

 

 

 

 

 

 

 

 

When this DVD player is idle (after about 5 minutes of 

inactivity), the screen saver can be enabled to prolong the 

TV monitor’s life.