Blodgett BG2136 User Manual
1
ENGLISH
III. OVEN SPECIFICATIONS
Table 1-1: Dimensions
Overall Height:
single oven with 17-1/2" (446mm) legs
43-1/2" (1105mm)
double oven with standard 17-1/2" (446mm) legs
63" (1600mm)
double oven with optional 20-1/2" (521mm) legs
66" (1676mm)
double oven with optional 25-1/2" (648mm) legs
71" (1803mm)
triple oven with 6" (152mm) legs
71" (1803mm)
Overall Depth:
46" (1168mm)
Overall Length:
with standard 60"/1524mm conveyor
61" (1549mm)
with optional 56"/1422mm conveyor
57" (1447mm)
with optional 76"/1930mm conveyor
77" (1956mm)
Baking Chamber Length
36" (914mm)
Conveyor Width:
Single Belt
20" (508mm)
Split Belt
2 x 9-1/2" (241mm)
Conveyor Length
56" (1422mm) or 60" (1524mm) or 76" (1930mm)
Recommended Minimum Clearances:
Rear of oven to wall
3" (76mm)
Control end of conveyor to wall
1" (25.4mm)
Non-control end of oven to wall
1" (25.4mm)
SECTION 1 - DESCRIPTION
I.
OVEN USES
BG2136 ovens can be used to bake and/or cook a wide
variety of food products, such as pizza, pizza-type products,
cookies, sandwiches and others.
variety of food products, such as pizza, pizza-type products,
cookies, sandwiches and others.
II. OVEN COMPONENTS - see Figure 1-1.
A.
Window: Allows the user to see and access food products
inside the baking chamber.
inside the baking chamber.
B.
Conveyor End Stop : Prevents food products from falling
off the end of the moving conveyor.
off the end of the moving conveyor.
C.
Eyebrows: Can be adjusted to various heights to prevent
heat loss into the environment.
heat loss into the environment.
D.
End Plugs: Allow access to the oven's interior.
E.
Control Panel: Location of the operating controls for the
oven. Refer to Section 3, Operation, for details.
oven. Refer to Section 3, Operation, for details.
F.
Machinery Compartment and Control Compartment
Doors: Allow access to the oven's interior components.
One door is located at each end of the oven. No user-
servicable parts are located inside the machinery compart-
ment or control compartment.
Doors: Allow access to the oven's interior components.
One door is located at each end of the oven. No user-
servicable parts are located inside the machinery compart-
ment or control compartment.
G.
Serial Plate: Provides specifications for the oven that affect
installation and operation. Refer to Section 2, Installation,
for details.
installation and operation. Refer to Section 2, Installation,
for details.
H.
Conveyor Drive Motor: Moves the conveyor.
I.
Crumb Pans: Catch crumbs and other material that drop
through the conveyor belt. One crumb pan is located
underneath each end of the conveyor.
through the conveyor belt. One crumb pan is located
underneath each end of the conveyor.
Fig. 1-1 - Oven Components
Table 1-2: General specifications (per oven cavity)
Weight
400 lbs. (182kg)
Rated Heat Input:
Natural gas ovens
70,000 BTU (17,638 kcal, 20.51 kW/hr.)
Propane ovens
70,000 BTU (17,638 kcal, 20.51 kW/hr.)
Maximum Operating Temperature
550°F (288°C)
Warmup Time
25 minutes
J.
Conveyor: Moves the food product through the oven.
Not Shown:
K.
Gas Burner: Heats air, which is then projected to the air
fingers by the blowers.
fingers by the blowers.
L.
Blowers: Fans that project hot air from the gas burner to
the air fingers.
the air fingers.
M. Air Fingers: Project streams of hot air onto the food
product.