Psion Teklogix Vehicle-Mount Computer 8590 User Manual

8.5.2  Touch (PS2) For Windows XP & XP Embedded

8.5.2.1

Installation

The touch drivers to be used can, by default, be found on the Compact Flash or hard 
drive under Util/atouch/<verNR>. In addition, you will find our drivers on the 
included driver CD.

1. Open the corresponding folder and run Setup.exe.
2. On the Welcome dialog tap Next.
3. In the Software License Agreement window, choose I accept all of the 

terms of the above License Agreement and then tap Next. 

4. On the Select Controller dialog choose PS/2 and tap Next.
5. Deselect the option in the Configuration Complete dialog and end by 

tapping Finish.

6. In the following window, confirm the dialog by tapping OK.

7. Restart your computer.

8.5.2.2

Calibration

The touch must be calibrated so that it functions correctly. 

1. Start the touch configuration tool under Start/Programs/Hampshire 

TSHARC Control Panel.

2. Choose the Calibration tab and tap the Touch field.
3. Once calibration is complete, finish by tapping Accept.
4. Choose the Click Settings tab and choose Enable right click emula-

tion. Enter the following values:
Right-Click Area + Double-Click Area each to 13;
Right-Click Delay + Double-Click Delay each to the third line.

5. Exit the tool with OK.