Pelco PelcoNet NET300 Multimedia Transmission Via Network C2908M-B User Manual
78
C2908M-B (4/05)
6. Connect the monitor.
8. Plug the DB9 cable into the RS232/422485 port on the transmitter. (In the Interface Mode field, select RS-422-485.) The data format should
be 4800, 8, no parity, 1.
9. Connect the camera’s video to the transmitter.
CONNECTION SCENARIO 2 – USING A KBD4000 FOR MULTIPLEXER CONTROL
Figure 45. KBD4000 Connected to a Multiplexer
1. Connect a DB9 cable to the RS232/422/485 port on the NET300 receiver. (In the Interface Mode field on the configuration page for the
interface settings, select RS-422/485.) The data format should be 9600 baud, 8 data bits, odd parity, and 1 stop bit.
NOTE: If you set all your cameras to Standard Coaxitron for better control on the browser, you will lose most of the KBD4000 keyboard
functions. If you set your cameras to Extended Coaxitron, you will have all the keyboard functions but the PTZ functions on the NET300 will
be very slow.
functions. If you set your cameras to Extended Coaxitron, you will have all the keyboard functions but the PTZ functions on the NET300 will
be very slow.
TRANSMITTER
RX -
RX +
12 VAC
KBD4000
STRAIGHT
CABLE
RECEIVER
1
2
3
4
8
7
6
5
STRAIGHT CABLE
COM IN
MULTIPLEXER
TX -
TX +
RX -
RX +
TX +
RX -
RX +
TX -
TX +
RS232/422/485
RS232/422/485
9600, 8, ODD, 1
1
2
3
4
8
7
6
5
9600, 8, ODD, 1
Video Out
Video In
MONITOR
TRANSMITTER
MAIN