Perlick DC Series Concessionaire Portable Dispensers DC96S User Manual
Form No. Z2283
Rev. 06.14.10
Installation and Operating Instructions
Sizes and Specifications, Concessionaire Dispensers
2
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
MOdEL NOS.
dC72S
dC84S
dC96S
KEG CAPACITY
2 Keg
3 Keg
4 Keg
CABINET
Length Ins. (mm)
72” (1829)
84” (2134)
96” (2438)
DIMENSIONS Depth Ins. (mm)
24
3
/
4
” (629)
24
3
/
4
” (629)
24
3
/
4
” (629)
w/o BuMPERS Height Ins. (mm)
34
1
/
2
” (876)
34
1
/
2
” (876)
34
1
/
2
” (876)
NO. OF DISPENSING HEADS
1
1
2
NO. FAuCETS
2
2
2
CONDENSER uNIT H.P.
1
/
4
1
/
3
1
/
3
RuNNING LOAD - AMPS
5.9
7.5
7.5
SHIP WT lbs. (kg)
445 (202)
505 (229)
545 (247)
INTERIOR
door sill: High strength polyethylene. door pan and ceiling: High strength polystyrene.
Floor pan: Satinless steel. Walls: Galvanized steel.
ExTERIOR
All Models: The top is stainless steel. The back, front and sides are stainless steel. Bottom is
galvanized steel. Doors and grilles are stainless steel.
REFRIGERATION
R-134a capillary tube-type. Aluminum fin and copper tube evaporator, epoxy coated coil. Forced air
into dispensing head. Adjustable temperature control. Self-defrosting. Pull-out condensing unit for
service and cleaning.
VENTILATION
Front ventilated.
ELECTRICAL
115 Volt, 60 Hz., 1 Phase AC. Furnished with three prong, six foot NEMA5-15P cord.
Contact Perlick for other voltage/frequency requirements.
PLuMBING
Evaporator condensate has been plumbed to a condensate pan located in the compressor housing.
INSuLATION
Foamed-in-place polyurethane; 2” walls, 1
1
/
2
” top and floor.
OPTIONAL ACCESSORIES
• Keg Couplers
• Faucet Locks
• Regulators
• Optional Dispensing Heads
TopView
End View
NOTE: This equipment is intended for the storage and display
of non-potentially-hazardous bottled or canned products only.