Pelco Endura C4625M User Manual
6
C4625M (9/09)
Channel Management
ASSOCIATING A CAMERA WITH A CHANNEL
A camera should be associated with only one UDI5000-CAM. Although a camera can transmit video to more than one UDI5000-CAM, each
subsequent video stream can impact camera performance.
subsequent video stream can impact camera performance.
Before you associate a camera with the UDI5000-CAM, refer to the manufacturer’s documentation to locate the following information.
•
Manufacturer
•
Model number
•
IP address
1. From the Channel Management tab, click the Add button
below the list of channels. An unassigned channel appears in the list.
Figure 3. Channel Management Tab
2. Select the camera manufacturer and model number from the Camera Information fields.
3. Enter the credentials for the camera including its IP address, user name, and password.
The Endura system requires the user name and password to transmit configuration information and video streams between the camera and
the Endura viewing stations. This information is configured directly on the camera and is not maintained in the Endura system. If you
change the user name or password on the camera, you must update it for the camera association in the UDI5000-CAM as well.
the Endura viewing stations. This information is configured directly on the camera and is not maintained in the Endura system. If you
change the user name or password on the camera, you must update it for the camera association in the UDI5000-CAM as well.
4. Click Apply. The camera appears in the Channels list, and a preview of the live video appears above the camera information.