Philips FLAT TV 37PF9975 User Manual

20

To enhance the sound reproduction of your TV you can
connect an externally powered subwoofer (between 20 and
250 Hz).

&

Connect the audio cable of the external subwoofer to
the 

socket at the rear of your TV.

é

Select 

in the Setup, General menu, p. 9.

“

Adjust the frequency of the external subwoofer to 100-
120 Hz (according to your personal preference) if
present on the subwoofer.

‘

Adjust the volume level of the external subwoofer,
presumed this control is present on the subwoofer.
See also the instruction manual of the external
subwoofer.

&

Connect the audio cable to the multi channel Surround
receiver and to 

and 

at the bottom of

your TV  1.

é

If you want the loudspeakers of your TV to act as centre
speaker, also connect an audiocable to the multi channel
Surround receiver and to the

at the

bottom of your TV 2.

“

Select 

in the Source menu. See p. 10.

The loudspeakers of the TV will now only produce
centre sound, the loudspeakers connected to the audio
receiver will produce Surround Sound.The volume has
to be controlled via the multi channel Surround receiver.

&

Connect your camera, camcorder or game as shown.

é

Connect to 

2 and 

3 for mono

equipment. For stereo equipment also connect 

3.

S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the 

input

1 and 

inputs 3.

Do not connect cable 1 and 2 at the same time. This
may cause picture distortion !

&

Insert the plug into the headphone socket L as shown.

é

Press ¬ on the remote control to switch off the
internal loudspeakers of the TV.
The headphone impedance must be between 8 and 4000
Ohm. The headphone socket has a 3.5 mm jack.
In the Sound menu select 

to adjust

the headphone volume.