Pioneer GEX-AIRWARE1 User Manual

28

29

You can simplify the list of channels that you see when

you rotate the dial. To skip over a channel:

1. Use the “

menu” button and dial to select

“Channel Access.”

2. Choose the “Channel

Skip/Add” option.

3. You will see a list of

channels. There is a

“+” or a “-“ in front

of each channel. To

skip a channel, highlight

that channel and

press the dial in to

change the “+” to “-.” To add a channel, change

the “-“ to a “+.”

4. When you’re done, press the “

menu” button twice

(or do nothing for 15 seconds) until your AirWare returns

to normal operation.

TIP: You can still tune to any channel by entering the

channel number or by pressing a preset. Skipping a

channel does not remove it from use.

TIP: This should not be used for “parental control.” To

completely block access to any XM channel, contact XM

Listener Care at 1.800.XM.RADIO (1.800.967.2346).

You can return your AirWare to its factory-installed format.

Be careful: This feature erases all settings, including

Stock Ticker, display options, audio options, channel

skip/add, Info Extras, and anything stored in “MY XM.”

1. Use the “

menu” button and dial to select “Set Factory

Defaults.”

2. Select “Yes” to restore your AirWare to the factory settings.

Using AirWare At Home

Turn off your AirWare and your audio system. Connect your

AirWare to your audio system in either way illustrated below.

If you use the home docking station and connect it to a

stereo, you must plug in the AC adaptor and home antenna.

Your AirWare’s audio output will not work if these are not

connected.

If you attach your AirWare to powered speakers, adjust the

audio level using the speakers’ volume control.

TIP: If you hear nothing, try adjusting the volume controls

located on your AirWare. If there does not appear to be

power, check all connections and make sure all plugs are

inserted completely.

user_gd_engfinl6.r5.qxd  3/29/05  7:50 PM  Page 28