Pioneer GEX-AIRWARE1 User Manual

Activating Your AirWare

Turn the dial to highlight channel 0, and press the dial in

to select it. You should see an 8-character XM Radio ID

in the display. (The XM Radio ID should also be on your

AirWare’s package and under the battery.) Write the ID here:

The XM Radio ID does not use the letters I, O, S, and F.

Activate your XM Satellite Radio service by contacting

XM at http://activate.xmradio.com or by calling

1.800.XM.RADIO (1.800.967.2346). You will need the

XM Radio ID and a major credit card.

XM will send a signal from the satellites to activate the

full channel lineup. Activation normally takes 10 to 15

minutes, but during peak busy periods, you may need to

keep your AirWare on for longer to complete the

activation process. When you can access the full channel

lineup on your AirWare, you’re done!

Go Ahead!

Rotate the dial to preview a list of channels. When you

find one you’re interested in, press the dial in to tune to

that channel.

Listening To XM

Changing channels

1. Rotate the side dial to preview a list of channels.

2. When your desired channel is highlighted, press the

dial in to select that channel.

-OR-

1. Press the “

pre/dir” button until the word

“DIRECT” flashes in the display.

2. Press the number keys corresponding to a channel

number. For channel 8, press “

8.” For channel 130,

press “1,” then “3,” then “0.”

-OR-

1. Press the “ ” or “ ” buttons while in “LIVE” mode.

You will see the channels organized by category.

2. Rotate the dial to highlight a channel. Press the dial in

to select that channel.

PI Radio Artwork

Note: Keypad Artwork for laser etching of painted surfaces

02.16.04

Note: Faceplate Artwork IMD parts

Note: Power and scroll wheel for screen printing - COLOR TBD

Note: Phone and RF icon are be to molded in to the receiver

user_gd_engfinl6.r5.qxd 3/29/05 7:50 PM Page 16