Radio Shack PLNV430 User Manual
11
GPS(Global Positioning System)
with your PC via the ActiveSync-cable.
2. Place the CD 1 with the navigation
software in your CD drive. The
installation will start automatically.
installation will start automatically.
3. Follow the program instructions.
Contents of The Navigation CDs
It is possible for several CDs to be
contained in the scope of the delivery
according to the version. Content of the
CDs:
CD 1 contains the PC application,
digitalized card material and the data
material for restoring the content of the
memory card fast. Additional material on
the card will be located on the optional
CD2. The PC application will be installed
on the computer and used to set up your
own card details. Apart from this, it will
support the recreation of data on the
memory card.
It is possible for several CDs to be
contained in the scope of the delivery
according to the version. Content of the
CDs:
CD 1 contains the PC application,
digitalized card material and the data
material for restoring the content of the
memory card fast. Additional material on
the card will be located on the optional
CD2. The PC application will be installed
on the computer and used to set up your
own card details. Apart from this, it will
support the recreation of data on the
memory card.
Installing Microsoft ActiveSync
In order to transfer your data between
your PC and your navigation system you
need the Microsoft ActiveSync program.
The cost of the navigation system includes
a license for this program which can be
found on the Support CD.
Attention: Important files can be
overwritten or changed during the
installation of software. You should create
a hard disk backup, in order to be able to
have access to the original files in the
case of possible problems following the
installation. You must have administrator
rights to install the software under
Windows 2000/XP.
Attention: You should not connect the
navigation system to your computer yet.
1.Insert the Support CD and wait until the
In order to transfer your data between
your PC and your navigation system you
need the Microsoft ActiveSync program.
The cost of the navigation system includes
a license for this program which can be
found on the Support CD.
Attention: Important files can be
overwritten or changed during the
installation of software. You should create
a hard disk backup, in order to be able to
have access to the original files in the
case of possible problems following the
installation. You must have administrator
rights to install the software under
Windows 2000/XP.
Attention: You should not connect the
navigation system to your computer yet.
1.Insert the Support CD and wait until the
program starts automatically.
Note: The Auto Run function is probably
deactivated if it does not function. The
Setup program on the CD must be
started, to start installation manually.
Note: The Auto Run function is probably
deactivated if it does not function. The
Setup program on the CD must be
started, to start installation manually.
2.Choose the language, click then Install
ActiveSync and follows the instructions
on the screen.
on the screen.
3.Connect the navigation system to your
computer with the assistance of the
ActiveSync Cable, while the connection
options are checked. To do this, push
the USB connector into a free USB port
on your computer. The hardware
installation assistant recognizes now a
new appliance and installs a suitable
ActiveSync Cable, while the connection
options are checked. To do this, push
the USB connector into a free USB port
on your computer. The hardware
installation assistant recognizes now a
new appliance and installs a suitable
driver which can take some minutes.
Repeat the connection search if it fails
the first time.
Repeat the connection search if it fails
the first time.
4. Follow the instructions on the screen.
The program will now set up a
partnership between your PC and the
device.
partnership between your PC and the
device.