Panasonic Attune II Installation Instruction

Page of 90
3
English
Before use
w
wPreface
The WX-CC411 and WX-CC412 are Center Modules for the wireless intercom systems that are used in drive-thru outlets.
w
wFeatures
w
p The WX-CC411 is designed for single lane operation of drive-thru outlets; the WX-CC412 is designed for dual lane operation.
w
p A system compliant with the 1.9 GHz band DECT
*
 standard is used so the voices of the store personnel and customers are 
heard clearly and distinctly even in open areas, and interference is minimal, resulting in stable communication. 
* Digital Enhanced Cordless Telecommunications
w
p A high degree of vocal clarity is ensured by a powerful echo canceller and digital noise reduction (Digital Noise Reduction).
w
p The cabinet supports wall-mounting for easy installation.
w
p The total number of All-In-One Headsets and Belt Packs that can be registered is 32. Up to four operators can communicate 
at the same time per lane using All-In-One Headsets and Belt Packs.
w
p This unit has a 7-Type LCD display with a touch panel, and is easy to operate.
w
p This unit can be connected to an IP network using Ethernet to enable remote control operations to be performed.
w
p Using an SD card, it is possible to back up and restore the settings, and save messages unique to the outlet.
w
p The system contains a scheduler to enable the greeter message to be changed at designated times and reminder messages 
to be played back automatically.
w
p Up to four Network Cameras made by Panasonic can be registered, and their images can be monitored on this unit’s LCD 
display.
w
p Alert signals that have been received can be sent to the All-In-One Headsets or Belt Packs, signals can be output to external 
devices, and alert emails can be sent to external destinations.
w
wSystem diagram
By connecting the Center Module and All-In-One Headsets or Belt Packs wirelessly, it is possible to communicate between the 
All-In-One Headsets or Belt Packs or between the All-In-One Headsets or Belt Packs and the customers at the order post.
All-In-One Headset
WX-CH450
Belt Pack
WX-CT420
Center Module
WX-CC411/WX-CC412
All-In-One Headset
WX-CH450
Vehicle detector
Order post
Microphone
Speaker
TALK
(Communications with
 customers)
PAGE
(Communications with 
other store personnel)
Belt Pack
WX-CT420
w
p Connect the vehicle 
detector to terminals 
CNT1 and COM of vehicle 
detector input [VDET]. 
If the vehicle detector is 
connected to terminal 
CNT2, it will not work, 
since this terminal is for 
expansion (unused).
Note
WX-CC411_PGQP1742ZA_SI_.indb   3
2014/01/17   18:11:09