Toastess Intelligent Countdown tt-522 User Manual

1. Remove all packaging. 
2. Read all instructions carefully and keep them for future reference. 
3. Make sure that the Crumb Trays are in place. 
4. Plug the power cord into a 120 V AC wall outlet.  Operate the 

toaster once or twice without bread on the highest browning level 
to burn off any residue left from the manufacturing process.   Any 
smoke or smells produced during this procedure are normal. 

Interrupts the toasting cycle 

First defrosts frozen bread then toasts 

Reheats previously toasted bread, bagels, etc. 
without further browning

Browns both sides of the bread 

Warms the outside crust and browns the cut 
side of the bagel, English muffin, etc.  

1. Plug power cord into a 120V AC wall outlet. 
2. Select the degree of browning on the Browning Control Knob. 

Light – setting 1 or 2 
Medium – setting 3 or 4 
Dark – setting 5

3. NOTE:  If the toaster is not plugged in, the carriage control 

Toasting (both sides) 
1. Slide the Bagel/Toast Control to the right (Toast).  
2. Place slices of bread, waffles, etc. into the bread slots. The bread 

guides will adjust automatically to hold thinner slices.  

3. Select the desired setting on the Browning Control Knob.
4. Push the Carriage Control Lever down until it locks.  The Cancel 

light will come on.   If you wish to raise the Carriage Control Lever
before the end of the toasting cycle, press the Cancel button.

5. When the toasting cycle is complete, the Carriage Control 

Lever will pop-up automatically.

5

Booklet_TT-522_ENG.qxd:Salton Booklet  6/18/09  2:06 PM  Page 5