Pioneer DVR-S201 User Manual

7

<DRC1101>

En

1 Disc tray

Place the disc on the tray with its label side facing up (Operate
with the OPEN/CLOSE button)

2 Filter cover

Sliding the filter cover to the right and then removing it will
expose the filter located to the rear of the cover. Note that the
ventilation holes located on the cover are designed to prevent
the drive from overheating, and that the drive should be
placed so that these ventilation holes remain unblocked, as
failing to do so may result in breakdown or malfunctioning.

3 Power indicator

Lights when the power has been turned ON

4 DISC indicator

Lights when a disc has been inserted

When tray is opened or closed

DVD-ROM disc

DVD-R disc

Unsupported disc

5 Operation (READ/WRITE) indicator

Operation status is indicated as follows:

6 OPEN/CLOSE (

0) button

Opens and closes the disc tray

7 POWER switch

Turns the power ON and OFF

8 SCSI ID switch

Sets the device’s SCSI ID

9 TERMINATION switch

Turns the device’s SCSI termination ON and OFF

0 AC inlet (AC IN)

Provides a connection point to a wall outlet (AC 100 to 240 V;
50/60 Hz) when the accompanying power supply cord is used

- SCSI connectors

Two SCSI amphenol 50 P connectors are provided for SCSI
chain connection (either connector may be used)

During reading

During writing

When an error occurs

• Abnormal rise in

internal temp

• Lens or disc dirty
• Other error

DVD-R DRIVE

1

4 5

6

7

2

3

8

9

0

-

Blinks green

Lights green

Lights orange

Blinks orange

Lights green

Lights orange

Blinks orange

• Blinks 1x and then repeats

• Blinks 2x and then repeats
• Blinks 3x and then repeats