Tektronix Camcorder 2200 User Manual
2-71
Wipe Subpanel
Wipe Pattern Modifiers
The
SPLIT
button toggles split mode on and off. When split mode
is on, the selected wipe pattern is split into two. Split operation is
affected by the
affected by the
SPLIT OFFSET
button and knob in the Wipe Modifier
menu.
H MULTI
and
V MULTI
allow multiple copies of the same wipe
pattern to appear.
Pressing
H MULTI
results in an additional copy of the wipe pattern
being arranged horizontally (in a row). One additional copy of the
pattern is supplied for each push of the button, up to a maximum
of eight rows. Similarly,
pattern is supplied for each push of the button, up to a maximum
of eight rows. Similarly,
V MULTI
produces multiple patterns arranged vertically in a
column. Pressing both
V MULTI
and
H MULTI
at the same time
results in a grid alignment of multiple patterns.
If either button is held down for 1/2 second, that aspect
(horizontal or vertical) returns to a single pattern.
(horizontal or vertical) returns to a single pattern.
Additional modifiers are available through menus available
under the Wipe menu. These menus are described in Section
Three of this manual.
under the Wipe menu. These menus are described in Section
Three of this manual.
Wipe Positioner Buttons
The
POS NORM
and
POS AUTO
buttons are mutually exclusive;
only one can be on, although both can be off. If both are off,
delegating the joystick has no effect on the pattern.
delegating the joystick has no effect on the pattern.
Pressing
POS NORM
allows you to move the center of the wipe
solid with the delegated joystick on the positioner subpanel.
When used for a wipe transition, the
When used for a wipe transition, the
POS NORM
button may cause
the wipe edge to pop if the pattern is too far off center when a
transition is performed.
transition is performed.
Split
H
Multi
Multi
V
Multi
Multi
Pos
Norm
Norm
Pos
Auto
Auto