Tektronix Camcorder 2200 User Manual
2-82
Section 2— Control Panel Descriptions
External Interface Subpanel
The External Interface Subpanel, located near the left end of the
upper control panel, provides selection of the type of interface to
be used to communicate with external devices.
upper control panel, provides selection of the type of interface to
be used to communicate with external devices.
The buttons in this subpanel perform the following functions:
The
EDIT Enable
button enables or disables editor access to the
switcher. Initially pressing the button illuminates it and allows
external control of the switcher through the Editor port. Pressing
the button a second time turns off the button lamp and disables
editor control of the switcher. With
external control of the switcher through the Editor port. Pressing
the button a second time turns off the button lamp and disables
editor control of the switcher. With
EDIT Enable
off, editor
protocol messages that affect the switcher are still acknowledged
by the switcher, although it does not act under Editor control. For
example, the switcher will still send status information to the
editor.
by the switcher, although it does not act under Editor control. For
example, the switcher will still send status information to the
editor.
NOTE:
An editor cannot control the
EDIT Enable
button via software
protocol. In addition, the
EDIT Enable
button does not affect
communication through the other serial ports.
Editor
Enable
Enable
GPI
Enable
Enable
Periph
Enable
Enable
External Interface
Figure 2-14. External Interface Subpanel
Edit
Enable
Enable