Tektronix Camcorder 2200 User Manual
2-91
Preview/Aux Bus Source Select and Delegate Subpanel
Effects Send – Looping Mode
Looping mode takes the output of an M/E Keyer, sends it to an
external DPM, then returns the output of the DPM to the
Mix/Wipe circuit of the same M/E in the switcher. This provides
the effect of inserting a DPM right into the M/E, between the
Keyer and the Mix/Wipe system, as illustrated in
external DPM, then returns the output of the DPM to the
Mix/Wipe circuit of the same M/E in the switcher. This provides
the effect of inserting a DPM right into the M/E, between the
Keyer and the Mix/Wipe system, as illustrated in
Figure 2-18. Effects Send Looping Mode
1.
To select Effects Send looping mode, first press the
AUX BUS
button on the main menu panel, then press the
PHYS AUX
SELECT
soft button to select the Aux Bus to be looped. With the
EFX LOOP MODE
button select
EXT
LOOP
.
2.
With one of the
BUS DELEGATE
buttons, select the (physical)
AUX BUS (1-2)
that you want to use. With the switcher set up
as described previously for looping, the DPM output will
automatically be routed to the Mix/Wipe system of the M/E
whose Keyer output you sent to the DPM.
automatically be routed to the Mix/Wipe system of the M/E
whose Keyer output you sent to the DPM.
Key 1
Aux Bus 1 - 4
Effects Return Input
M/E
KEYER
M/E
MIXER
Key 2
Key 2
A Bkgd
A Bkgd
B Bkgd
B Bkgd
M/E OUT
Key 1
DPM
SWITCHER