Tektronix Camcorder 2200 User Manual
2-103
Remote Aux Bus Panels
Joy Stick Override
Joy stick override (JSO) causes the normal input selection on the
aux bus to be overridden and another input to be used in its place.
To activate joy stick override, press the JSO button; to return to
normal operation, release the JSO button.
aux bus to be overridden and another input to be used in its place.
To activate joy stick override, press the JSO button; to return to
normal operation, release the JSO button.
Programming the Joy Stick Override
To program the JSO buttons:
1.
Set the test mode switches to 12 (0011)
The test mode switches are on the rear of the Remote Aux Panel.
2.
Press and hold the JSO switch to be programmed.
3.
Press the desired source button on the Remote Aux Panel.
4.
Release the JSO Switch.
5.
Repeat steps 2 through 4 for the other buttons.
6.
Return test mode switch to 0 (0000).