Tektronix Camcorder 2200 User Manual

2-38

,

,

,

If the next desired register is in the current bank, you may press 
just the desired

If the desired bank is 0 or 1, you may substitute 

or

for

,

in the above sequences.

To recall a register, press the following buttons: 

,

,

When an E-MEM register is recalled, the key memory for any 
recalled crosspoint is updated.

During an E-MEM recall, if you don’t want the crosspoint to 
change, you can manually hold down the present crosspoint 
button while the E-MEM register is recalled. This is referred to as 
“crosspoint override,” and If key memory is off at this time, the 
video and key crosspoint are held. If key memory is on, the video 
and key crosspoint and the current keyer memory state are held.

During an E-MEM recall, if you don’t want the crosspoint on an 
individual bus to change, you can manually hold down the 
present crosspoint buttons while the E-MEM register is recalled. 
This is referred to as “crosspoint override.” When this is done, the 
video and key crosspoints are held, and if key memory is on at this 
time, the current keyer memory state is also held.

See the

 button description, later in this section, for a 

method of holding all sources while E-MEM registers are recalled.