Tektronix Camcorder 2200 User Manual

2-50

Section 2— Control Panel Descriptions

To Clear a Single Crosspoint Key Memory:

Hold a key bus crosspoint, single press

CLEAR WORK

BUFR

button:

Clears only the key memory portion of the Current Working
Buffer for switcher key crosspoints held down. Clears any
split keys for that key crosspoint.

To Clear Current Working Buffer for a selected E-MEM level
and clear any split keys for that key crosspoint— including
Keyers for E-MEM level owning Crosspoint Keyer:

Hold a key bus crosspoint, double press the

CLEAR

WORK BUFR

button.

CLEAR WORK BUFR

is always functional, even when the other

effects editing buttons are not enabled (

KEYFRAME EDITING

set to

DISABLE

in the Keyframe Menu).

The

CLEAR WORK BUFR

button is normally off, but lights for

one-half second when pressed.

NOTE:

The “Current Register” is defined as the active register on each

E-MEM level. If all enabled levels are in the same register, the Current
Register is the same as that shown in the E-MEM keypad display.
However, if the enabled levels have different Current Registers, as
indicated by a “

∆

” between the bank number and the register number,

the Get and Put operations will operate on different registers. For
example, if enabled level M/E 1 is in Register 1, and enabled level M/E 2
is in Register 2, a “PUT CUR INTO 03” operation will copy M/E 1
Register 1 into M/E 1 Register 3, and M/E 2 Register 2 into M/E 2
Register 3.