Tektronix Camcorder 2200 User Manual

2-67

 – The six

 wipe buttons let you 

learn a wipe effect into memory and then recall it all at once. 
Everything on the Wipe Subpanel is learned except the delegate 
buttons. Upon recall, the stored wipe parameters are transferred 
to the delegated wipe generator. This shared system allows you to 
transfer wipe effects from one wipe generator to another.

To store a wipe setup, press the

button, 

followed by any one of the six

 buttons. The current wipe 

pattern selection and all modifiers will be memorized into the

 register. To recall the wipe effect later, press that 

 

button. After a

 button is pressed, either for a learn or recall 

operation, the button remains lit as a reminder that it was the last 
one used.

allows an accidental 

 wipe recall or learn 

to be “un-done.” When undoing a recall, pressing this button 
restores the panel to the state that existed before the last learn; 
when undoing a learn, it restores the user register to its previous 
state (the control panel is not affected).

Pressing the

 button toggles the wipe edge softness on and 

off. When the button is illuminated, wipe edge softness can be 
adjusted with the 

 knob. 

The 

 knob controls the amount of wipe edge softness 

when

 is on. A setting of full counter-clockwise rotation 

causes zero softness, while full clockwise rotation causes 
maximum softness.