Troy-Bilt CSV 060 Push Chipper Shredder Vac Owner's Manual

The operation of any chipper shredder 

can result in foreign objects being thrown into the 

eyes, which can damage your eyes severely. Always 

wear the safety glasses provided with this unit or 

eye shields while operating or while performing any 

adjustments or repairs.

Allows twigs and small branches up to 1-1/2” in diameter to be 

fed into the impeller for chipping.

Used to adjust the nozzle ground clearance ranging 

approximately 5/8” to 4 1/8”.

Yard waste such as leaves or pine needles can be vacuumed up 

through the nozzle for shredding.

Used as an alternative to the nozzle to vacuum yard waste such 

as leaves or pine needles. 

Used to vacuum yard waste in hard to reach places of yard. 

The nozzle/hose vac handle is located on top of the nozzle. Use 

it to switch vacuum suction between the nozzle and the hose 

assembly.

Used to guide hose assembly when vacuuming.

The recoil starter is attached to the right upper handle. Stand 

behind unit and pull the recoil starter to start engine.