Quatech AirborneDirect ABDG-ET Series User Manual
Hardware Installation
100-8007-141G AirborneDirect™
Ethernet Bridge User's Guide
Page 9
Quatech, Inc. Confidential
STANDARD PACKAGE HARDWARE DESCRIPTION
XX
XX
Figure 2
XX
identifies the components on the Bridge in its standard packaging. These components
include:
An external antenna.
An RJ-45 jack and cable attached to the Bridge.
A Reset switch on the bottom of the Bridge.
Three indicator Light Emitting Diodes (LEDs) on the top of the Bridge.
A mounting cradle.
Figure 2. AirborneDirect™ Ethernet Bridge Hardware (standard package)
Reset Switch
The bottom of the AirborneDirect™ Bridge provides access to a Reset Switch. The Reset switch
returns all Bridge parameters to their factory default firmware settings. To reset Bridge
parameters, press (and hold) this switch for at least 5 seconds after power is applied to the
Bridge. To protect against accidental resets, the Reset switch is recessed.
returns all Bridge parameters to their factory default firmware settings. To reset Bridge
parameters, press (and hold) this switch for at least 5 seconds after power is applied to the
Bridge. To protect against accidental resets, the Reset switch is recessed.