ONKYO DR-645 User Manual
9
En
Caution
• Turn the power off to all components before making
connections.
• Read the instructions of each component you intend to
use with this unit.
• Be sure to insert each plug securely. To prevent hum and
noise, avoid bundling the signal interconnection cables
together with the AC power cord or speaker cables.
together with the AC power cord or speaker cables.
• Adjust the video aspect ratio to match that of the
television.
• This unit adopts analog copy protection features. If the
unit is connected to a TV through a VCR (video cassette
recorder), the resulting playback may be affected.
Connect the unit directly to the television.
recorder), the resulting playback may be affected.
Connect the unit directly to the television.
• In all cases, use the highest quality cables for the best
possible picture.
• Select proper setting in the “VIDEO SETUP”.
A
HDMI video/audio output jack
Use an HDMI cable to connect the unit to an HDMI
compatible television or monitor.
• If the television or monitor is equipped only with a DVI
compatible television or monitor.
• If the television or monitor is equipped only with a DVI
terminal, a suitable adapter cable or adapters should be
used. Note that the television connected in this way must
be HDCP compatible. Also note that this connection
outputs no sound.
used. Note that the television connected in this way must
be HDCP compatible. Also note that this connection
outputs no sound.
• Make sure that you read and understand the
documentation provided with the HDMI component.
■
HDMI video output formats
• 480p (60Hz)
• 576p (50Hz)
• 720p (50Hz) or 720p (60Hz)
• 1080i (50Hz) or 1080i (60Hz)
• 1080p (50Hz) or 1080p (60Hz)
• 576p (50Hz)
• 720p (50Hz) or 720p (60Hz)
• 1080i (50Hz) or 1080i (60Hz)
• 1080p (50Hz) or 1080p (60Hz)
■
To output audio from the HDMI jack
If the connected HDMI component is capable of inputting
HDMI audio, digital audio can be output from the HDMI
jack.
• Only PCM digital audio can be output from the HDMI
HDMI audio, digital audio can be output from the HDMI
jack.
• Only PCM digital audio can be output from the HDMI
jack.
B
Component video output jacks
Use component video cables to connect the unit to the
component video inputs of a suitably equipped television
or monitor to enjoy a high-quality picture. Use these
terminals in preference to composite video connections.
• If the component video terminals are connected to a
component video inputs of a suitably equipped television
or monitor to enjoy a high-quality picture. Use these
terminals in preference to composite video connections.
• If the component video terminals are connected to a
television with progressive scan capabilities, the output
can be set to match this.
can be set to match this.
• Note that these jacks cannot be connected to high
definition component jacks.
C
Composite video output jack
Use a RCA (pin) video cable to connect the unit to the
composite video connector of a television or monitor.
Use this connection only if no other video connection
method is available.
composite video connector of a television or monitor.
Use this connection only if no other video connection
method is available.
Connection to a TV
A
B
C
HDMI cab
le
RCA video cab
le
C
o
mponent
vide
o cab
le
TV (Monitor)