Nortel Networks Water System BCM 1000 User Manual
21
BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum
Appendix A
Getting started
About this guide
The BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum describes how to
install, configure, and maintain the BCM200 and BCM400 hardware running Business
Communications Manager (BCM) 4.0 software.
install, configure, and maintain the BCM200 and BCM400 hardware running Business
Communications Manager (BCM) 4.0 software.
The concepts, operations, and tasks described in this guide relate to the hardware of the BCM
system. This guide provides task-based information on how to install the hardware components
and perform basic configuration tasks.
system. This guide provides task-based information on how to install the hardware components
and perform basic configuration tasks.
Use Element Manager, Startup Profile, and Telset Administration to configure various BCM
parameters.
parameters.
In brief, the information in this guide explains:
•
Installing hardware components
•
Starting and initializing the system hardware
•
Replacing components
•
Testing the system
Audience
The BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum is directed to
installers responsible for installing, configuring, and maintaining BCM 4.0 systems.
installers responsible for installing, configuring, and maintaining BCM 4.0 systems.
To use this guide, you must:
•
be an authorized BCM 4.0 installer or administrator within your organization
•
know basic Nortel BCM terminology
•
be knowledgeable about telephony and IP networking technology
Acronyms
The following is a list of acronyms used in this guide.
Table 1 Acronyms (Sheet 1 of 3)
Acronym
Description
ACU
Audio conference unit
AIS
Alarm indication system
APC
American Power Conversion