Nortel Networks Water System BCM 1000 User Manual
Appendix E Using Element Manager to set the basic parameters
47
BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum
To connect to the BCM system
1
Open BCM Element Manager.
2
From the Network menu, select New Network Element, and then select Business
Communications Manager.
Communications Manager.
3
Enter the BCM system IP address, the username, and password (the default is are shown
below):
below):
IP address: 10.10.10.1
Username: nnadmin
Password: PlsChgMe!
4
Click OK.
5
From the Network Elements folder, select the BCM system IP address.
6
Make sure that the correct username and password are entered.
7
Click Connect.
You are now connected to the BCM system.
For more information on using BCM Element Manager, refer to the online Help within BCM
Element Manager.
Element Manager.
Configuring the initial parameters
Use the following procedures to configure the initial parameters for the BCM using Element
Manager:
Manager:
•
•
•
•
•
To enter a keycode
1
From the Configuration tab, click the System folder to expand it.
2
Select Keycodes. The Keycodes panel opens.
3
Click Connect to Nortel Keycode Retrieval System. The Open dialog box opens.
4
Select the keycode file for your system and click Open.
Refer to the Keycode Installation Guide for details on how to retrieve and enter the keycodes for
your system.
your system.