Nortel Networks Water System BCM 1000 User Manual
58
Appendix F Completing the initial installation (optional)
N0060603
N0060603
After the basic configuration is completed, you can further customize your system by using the
following configuration options:
following configuration options:
•
•
•
•
•
•
Configuring the media bay module
For information on installing a media bay module (MBM) and setting the dip switches, refer to
BCM 3.7 for BCM1000 Installation and Maintenance Guide.
BCM 3.7 for BCM1000 Installation and Maintenance Guide.
To configure the MBM
1
Open BCM Element Manager and connect to your BCM system.
2
From the Configuration tab, click the Resources folder to expand it.
3
From the Resources folder, select Telephony Resources (see
).
Figure 8 Telephony Resources page
4
In the Modules section, select the row of the MBM that you want to configure.
5
Double-click the Prog Type field to display the drop-down list.
6
Select the type of MBM that you installed in that location.
7
Click Enable.
8
Repeat steps 4 to 7 to enable each MBM in your system.