Netcomm Fast Ethernet Mini Print Server NP3640 User Manual

1. Start the Add Printer Wizard, select Network Printer, then click Next to browse for the Print

Server .

2. Locate and double-click the Print Server , select the desired port, and click Next.

3. Click "OK", and select the correct Manufacturer and Model for this printer.

4. Follow the prompts to complete the installation.

5. In the Printers folder, right-click the new printer, and select Sharing.

·

Select "Shared As:" and enter an appropriate name for this printer. Users will see this name
when browsing for the printer during installation.

·

If desired, click "Additional Drivers" and install printer drivers for other versions of
Windows, such as Windows 98. This will assist users during the installation process.

6. Click OK to close this Window. Configuration is now complete.

Client computers can now be configured as described in Section 4 - Configuring your
Computers.

The Print Server fully supports both Bindery and NDS Novell systems.

With either Bindery or NDS, two (2) NetWare operating modes are possible -Print Server and
Remote Printer. Print Server mode is recommended.

Novell Distributed Printing Services (NDPS) under NetWare 5 is also supported.

The following configuration methods are available. In each case, you must be logged into the
required NetWare Server with ADMIN rights.

Also, if using Windows, Novell's Client32 should be installed on your computer. Without
Client32, only limited configuration changes can be made on the NetWare Server.

Using the Setup Wizard is recommended. This allows configuration of the Print Server in
NetWare Print Server Mode, which is the recommended system.