Nordic Star Products 4.3A User Manual
Handling faxes
XFAX - User’s Guide 4.3a
20
INTR
Transmission interrupted
UNKN
Unspecified error
Numerical error codes above 20 means that a failure has occurred during fax data
transmission.
transmission.
Some examples of error code intervals:
20-39
20-39
Handshaking before the page failed
40-49
Fault in the transferring of data
50-
Handshaking after the page failed
6.2 Reschedule a fax
Outgoing faxes that are awaiting transmission can be “given a push”, i.e. the
transmission time can be set to the current time, by using the parameter -n to
faxq. E.g.:
transmission time can be set to the current time, by using the parameter -n to
faxq. E.g.:
# faxq -n 3
This means that an attempt is made to immediately transmit the fax with ID 3.
6.3 Scheduling a fax
The transmission time for a fax can also be brought forward in time by means of
the parameter -t as shown below:
the parameter -t as shown below:
# faxq -t 12:18 16
The above changes the transmission time for a fax with an ID of 16 to 12.18.
6.4 Canceling of a fax
A fax can be cancelled, i.e. removed from the outgoing fax queue, by means of
the command faxrm which takes one or several IDs as an argument. E.g.
the command faxrm which takes one or several IDs as an argument. E.g.
# faxrm 28 12
removes faxes with IDs 12 and 28.
Faxrm is also used to remove a fax from the statistic queues for sending and
faulty faxes. When canceling such faxes, the fax is marked as having been
removed in the statistics file, but statistic information still remains as a basis for
statistical calculations. In order to remove old statistics completely, the com-
mand faxclean is used, which can only be run by the system administrator.
faulty faxes. When canceling such faxes, the fax is marked as having been
removed in the statistics file, but statistic information still remains as a basis for
statistical calculations. In order to remove old statistics completely, the com-
mand faxclean is used, which can only be run by the system administrator.
All the faxes in a queue can be removed by using the parameter -all queue to
faxq, where the queue can be p (outgoing), s (sending), f (faulty) or r (receiving).
These can also be combined, e.g. faxq -all sf. If you wish to remove all faxes up
to a certain date, you use -all in combination with -to date. E.g.:
faxq, where the queue can be p (outgoing), s (sending), f (faulty) or r (receiving).
These can also be combined, e.g. faxq -all sf. If you wish to remove all faxes up
to a certain date, you use -all in combination with -to date. E.g.:
# faxq -all s -to 20010401