Nortel Networks Recording Equipment VSN04 User Manual

TOPS VSN Log and alarm messages

0000/0000

Message: Error encountered attempting to load DTMF patterns.  The symbol
[symbol] is referenced in the table [table_name] but not found in the table
[table_name].

Description:  Applications can not access the VIs because of a reference
error in an SDM table.  This table can not be accessed by the user.

Action:   Contact NT to correct the problem.

0000/0001

Message: Error encountered attempting to load DTMF patterns.

Description:  Applications can not access the VIs because of a reference
error in an SDM table.  This table can not be accessed by the user.

Action:   Contact NT to correct the problem.

0000/0002

Message: VIRM has been unable to load DTMF patterns.   The specific
problem encountered is described in another log.

Major

Description:  The Voice Interface Resource Manager could not load an SDM
table.  Either the previous, but usually the log immediately following this one,
identifies the specific problem.

Action:   The problem identified in the qualifying log must be corrected.
When corrected, the VIRM must be reload.  The alarm clears once this is done.

0000/0003

Message: Any outstanding alarms generated by the VIRM have been cleared.

Description:  This log is generated every time the VIRM PRU is brought into
service.  There may not be any outstanding alarms when the VIRM is brought
into service.

Action:   No action.