Nikon MPS1-T User Manual

Troubleshooting

There are several possible error situations if the LEDs do not ßash.

Error Messages 

Power-up diagnostic failure (hardware 
failure)

Note which LED is blinking and its color, then contact 
your dealer or Lantronix Technical Support.

The Server boots but does not try to 
load the Flash ROM code

Press the Test button. A brief description of the problem 
will be queued to the parallel port and printed.

Network Error: The ACT LED will blink 
yellow 2-3 times per second

A. Make sure the Ethernet network cable is properly 
connected and reboot the server.

B. If option A fails to resolve the problem, reload Flash 
ROM. See Appendix D.