Network Technologies CRYSTALMON CM-DT17 User Manual
NTI CRYSTALMON TFT/LCD MONITOR
9
Power Up
1. Connect the AC adapter to the power jack on the CRYSTALMON. Make sure the power connector is fully
inserted.
2. Plug the AC adapter into a power source and press the power button to power up the CRYSTALMON.
3. If the video source(s) are not yet ON, apply power to them at this time.
3. If the video source(s) are not yet ON, apply power to them at this time.
Figure 5- Connect the AC adapter
Power
Button
View of the control
buttons for the
CRYSTALMON
UNDERSIDE VIEW OF CRYSTALMON
Barrel
(Inside
barrel)
barrel)
(Outside
barrel)
barrel)
Power Connector
2.5 mm x 5.5 mm Female
12VDC @ 5A OUTPUT
12 VDC
AC
ADAPTER
IEC Connector
IEC Power Cord
REAR VIEW OF CRYSTALMON
12VDC
5A
-
+
NTI
NE TWORK
TECHNOLOGIES
INCORPORATED
Tel:330-562-7070
Tel:330-562-7070
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
R
Fax:330-562-1999
DVI
VGA