Netac Tech C670 Leaflet

 FM, LINE-IN, Mic, then press   to enter “Enc” setting.

Select”Enc”, and you can set the format of record by press 

 as:MP3,

IM ADPCM, MS ADPCM or PCM, then press   to enter “Channels” setting.

Select”Channels”, and you can set the channel of record by press 

 as:

Stereo or Mono, then press 

 to enter “Save” setting.

Note: When the setting of “Source” is “Mic”, the channel only can be set as

“Mono”.

Select”Save”, and you can set the save position of record file by press

 as: Internal or External, .then press 

 to enter “Sample” setting.

Select”Sample”, and you can set the Sample by press 

. When the

setting of “Enc” is “MP3”, Sample can be set as: 32000Hz or 44100Hz.  When

the setting of “Enc” is “IM ADPCM / MS ADPCM / PCM”,Sample can be set as:

8000HZ, 11025HZ, 16000HZ, 22050HZ or 32000HZ.Then press   to enter

“BitRate” setting.

Select”BitRate”, and you can set the Record BitRate by press 

.  When

the setting of “Enc” is “MP3”, BitRate can be set as 96kbps. When the setting

of “Enc” is “IM ADPCM / MS ADPCM / PCM”, BitRate is disable. Then press 

to enter “EXIT” setting.

Select ”EXIT”,  press 

 to exit REC-SETUP mode, go back to main menu

of MP3 Player.

Enter INFO menu, press 

 can browse system infomation of MP3 Player,

including: F/W Ver, Int Media and Ext Media. Press 

 can exit INFO menu,

and go back to main menu of MP3 Player.

Select “EXIT”, press 

 to exit main menu of MP3 Player.

When enter SETUP menu, please press 

 / 

 to select the submenu. The

operation of setting are as follows:

Select “EQ”, press 

 to enter, and you can select the sound mode of

music playing by press 

 / 

 as: NORMAL, ROCK, POP, JAZZ, or

CLASSICAL. After setting, press 

 again to go back to SETUP menu.

Select “PLAY MODE”, press 

 to enter, and you can select the mode of

music playing by press 

 /   as: NORMAL, REPEAT TRACK, REPEAT ALL,

SHUFFLE.  After setting, press 

 again to go back to SETUP menu.

Select “ERASE”, press 

 to enter, and you can delete any MUSIC/LINE-

IN/MIC file by press 

 / 

 or exit.Select the file you want to delete, press

 to affirm, then operate by the clew of LCD. Selsct “EXIT”, press 

to exit “Erase a file” and go back to SETUP menu.

Select “BACKLIGHT”, press 

 to enter,  and you can set the LCD  back-

light of MP3 Player by press 

 / 

 as: 0-60 seconds. After setting, press

 again to go back to SETUP menu.

1)

“M***.mp3” is title reserved for LINE-IN/MIC/FM recorded files in MP3

Player. Please avoid renaming music files to such titles before copy

them to MP3 Player. Otherwise they cannot be played back under

MUSIC MODE. The “***” is “0-9”.

2)

There is a system file named “SETTINGS.DAT” under the root directory

of MP3 Player to store all settings before its power off. If that file is

deleted, all settings will restore to default status.

3)

Netac Technology Co., Ltd. is not responsible for any loss arising out of

using Netac MP3 Player. The governing laws for this product are laws

of the People’

s Republic of China.

If you experience any of the following difficulties in using MP3 Player, use

this troubleshooting guide to help you solve the problem. Should any problem

persist, consult Netac Customer Service.

The battery is exhausted. Please change it!

Make sure the battery is inserted correctly.

The buttons are locked. Make sure the “Hold” switch is OFF.

Make sure the earphone port is connected securely.

Adjust the volume with 

 .

MP3 Player is not power on. Please power on MP3 Player and connect it to

your computer through the USB Cable.

Make sure the USB Cable is correctly connected. Please disconnect and

then connect the Cable to MP3 Player.

Driver has not been installed. Please refer to “Driver Installation on Windows 98”.

Format your MP3 Player and re-download the files.

The available memory space in MP3 Player may be insufficient. Please delete

some files first.

The amount of files stored in MP3 Player may be reach the maximum of the

system. Please delete some files first.

Netac Technology Co., Ltd.

6F, Incubator Building,

China Academy of Science & Tech Development,

No.1 High-tech South St,

Shenzhen, China 518057

Tel:

+86-755-26727800

    (Switchboard)

+86-755-26727500, 26727510, 26727520   (Technical Support)

Fax:

+86-755-26727610, +86-755-26727620

Website:

http://www.netac.com

Email:

sales@netac.com

          (Sales)

support@netac.com

 (Technical Support)

info@netac.com

  (Feed back)

Items

LCD

File Format

Record Format

Earphone Output

Frequency Response

Signal-to-noise Ratio

Total Harmonic Distortion

Radio Frequency Range

Recording Quality

Power Supply

Battery Life

Dimensions (L x W x H)

Weight

Computer

Operating System

USB Host Interface

Capacity*

Reading Speed

(PC configuration

dependent)

Writing Speed

(PC configuration

dependent)

Details

High definition array LCD

MP3/WMA

MP3

7mW +7mW, 32ohm

20Hz ~ 20KHz

>80dB

<0.05%

76 - 108MHz

44.1 KHz Sampling

Size AAA alkaline battery X 1

>10 hours

86.6mm X33.0mmX26.4mm

45g (without battery)

IBM Compatible PC, Notebook or Macwith USB port

Windows 98/Me/2000/XP/Server 2003, Mac OS

10.2 or above

USB Specifications 2.0/1.1/1.0

32MB ~ 512MB

1.0MB/S  USB1.1/1.0

3.5MB/S  USB2.0

672KB/S  USB1.1/1.0

1.1MB/S  USB2.0

Please press 

 / 

 to adjust the volume under FM and SCAN status.

The LINE-IN recorded files will be automatically saved with the title of “M001,

M002… ” and can be played back under LINE-IN MODE.

Before recording FM programs, please set the “Source” of “REC-SETUP” to

“FM”, then hold 

 to start FM program recording, press 

 again to

pause FM recording, and press 

 to stop.

MP3 Player can record by MIC under the MUSIC/VOICE mode.

The operation of files play and setting is the same as under the MUSIC MODE.

Before record, please set the “Source” of “REC-SETUP” to “Mic”, the record

operation of MUSIC/VOICE mode are as follows:

1)

Please press 

 to start VOICE record while in stop status. Please

put the 

 near the sound resource to ensure the record quality.

2)

Please press 

 again to pause/resume VOICE record, and press 

to stop.

LINE-IN
Under LINE-IN MODE MP3 Player can playback FM, MIicrophone or LINE-IN

recorded files, and record output program of connected audio/video device.

Connect the 2.5mm port of LINE-IN Cable to MP3 Player, and 3.5mm port to

audio output socket of any audio/video device.

The operation of files play and setting is the same as under the MUSIC mode.

Before LINE-IN record, please set the “Source” of “REC-SETUP” to “LINE-IN”,

the record operation of LINE-IN mode are as follows:

1)

Connect the 2.5mm port of LINE-IN Cable to MP3 Player, and 3.5mm port

to audio output socket of any audio/video device.

2)

Please press 

 to start LINE-IN record while in stop status.

3)

Please press 

 again to pause LINE-IN record, and hold 

 to stop.

About some capacity is reserved for programs in MP3 Player, so its actually

capacity may be a little less than the rated one.

Select “POWER SAVINGS”, press 

 to enter, and you can set the time of

auto turn off by press 

 /   as: 1 min, 5 min, 10 min or Disable. After setting,

press 

 again to go back to SETUP menu.

Select “CONTRAST”, press 

 to enter, and you can set the LCD contract

of MP3 Player by press   / 

. After setting, press 

 again to go back to

SETUP menu.

Select “FONTS”, press 

 to enter, and you can set the displayed lan-

guage by press   /   as: ENGLISH, Traditional Chinese, or Simplified Chinese.

After setting, press 

 again to go back to SETUP menu.

Select “EXIT”, press 

 to exit SETUP mode, go back to main menu of MP3

Player.

Under REC-SETUP can select each option of REC-SETUP menu by   /  , and

set the option by 

.

Select”Source”, and you can set the source of record by press 

 as: