Manualsbrain.com
  1. Manuals
  2. Brands
  3. Netopia
  4. 3-D REACH 6180088-00-01
  5. Leaflet

Netopia 3-D REACH 6180088-00-01 Leaflet

Download
Page of 2
 
For Microsoft Windows
 
1.
 
Insert the CD and double-click the Setup icon to load the driver for the 
Netopia 3-D Reach Wireless USB Adapter.
 
When the installation is complete, a 
new Wireless communication icon will 
appear in your system tray in the Win-
dows toolbar.
 
2.
 
Click the Wireless icon to start the Netopia WLAN Utility.
 
See 
 
“Netopia WLAN Utility Screens”
 
.
 
Note:
 
The Netopia WLAN Utility is not installed on Windows XP. Windows XP users 
should use the Windows XP operating system automatic wireless network configura-
 
tion feature to configure the wireless connection.
 
1.
 
Connect the Netopia Wireless USB Adapter to any available USB port on 
your PC.
 
2.
 
The USB Adapter should be immediately recognized. If necessary, you can 
use the Netopia WLAN Utility to configure and monitor your wireless con-
nectivity.
 
3.
 
You can enable Wireless Security on your Wireless network by using the 
security features of your USB Adapter in conjunction with your Netopia 
Wireless Gateway. (See 
 
“Wireless Security Password Setting”
 
)
 
Package Contents
Install the Netopia Wireless Driver
Install the Netopia Wireless USB Adapter
CD & Quickstart
Guide
Netopia 3-D Reach 
USB Adapter
 
Netopia WLAN Utility Screens
Connection Status
Connection
•
Connection Status: Tells the 
name of the wireless network cur-
rently in use.
•
Link Speed: Displays the speed 
of the current wireless link in bps.
•
Signal Strength: Graphical dis-
play of the signal strength on the 
current connection to the Access 
Point.
Activity
•
Sent (TX) bps: Data transmission 
rate (upstream) in bps.
•
Received (Rx) bps: Data recep-
tion rate (downstream) in bps.
•
Current Connection Status
 button: 
Allows you to view detailed infor-
mation for your wireless connec-
tion. When you click this button, 
the 
“Current Connection Status”
 
screen appears.
Current Connection Status
Adapter Information
•
Adapter Name: Name of the wire-
less USB adapter to which the 
driver is bound.
•
Station Address: MAC (hardware) 
address of this USB adapter.
Internet Protocol (ser ved to this PC by 
the Wireless Access Point/Gateway)
•
IP Address: IP Address currently 
being ser ved to this PC.
•
Subnet Mask: IP subnet mask for 
this PC.
•
Default Gateway: IP Address of 
the router/gateway for this wire-
less LAN.
•
DNS Server: DNS ser ver address 
for this wireless LAN.
Connection Information
•
Link Status: Connected to (MAC Address of the Access Point).
•
Network Mode: Ad Hoc (peer-to-peer) or Infrastructure (network).
•
Network ID (SSID): Workgroup name or ID of this wireless LAN.
•
Encryption: Wireless encr yption Enabled or Disabled on your network.
•
Power Mode: Continuos Access, Maximum Power Saving, or Fast Power Saving.
•
Channel/Frequency: (1 through 11) on which the network is broadcasting.
Available Networks:
•
Wireless Network Name: Net-
work to which you are currently 
connected.
•
Network Operating Mode: Auto-
matic, Device-to-device, or Base 
Station Mode.
•
Available Networks: Scans for 
available wireless networks within 
range. If you select a different 
one, click the 
Connect
 button. To 
scan for others as you change 
location, click the 
Refresh
 button.
Wireless Security Password Setting
•
Automatic Wireless Security Password: Leave this box unchecked if you are 
using a Netopia Wireless Gateway.
•
Password key: Transfer the Encr yption key from your Netopia Wireless Gateway 
to this field. Once you do this the following fields will automatically adjust to your 
entr y.
•
Key Format: ASCII Characters or Hexadecimal digits.
•
Key Length: 40 bits (5 characters or 10 hex digits; 104 bits (13 characters or 26 
hex digits)
•
Key Index: This should be the same key index as that used in your Netopia Wire-
less Gateway.
•
Click the 
Connect
 button.
 
1
2
3
 
Netopia
 
®
 
 3-D Reach™ Wireless
USB Adapter Installation
 
BROADBAND WITHOUT BOUNDARIES™