Multi-Tech Systems Multi-Tech MultiFRAD 100-Series FR111 User Manual

37

This chapter covers the loading of the software utility and then the
configuration of the unit from either a Windows based pc or a dumb
terminal.  When a Windows based pc is used, the software utility is
loaded using the procedures in section 4.2 and then the unit is config-
ured using the procedures in section 4.3.  If a dumb terminal is used, the
MulitFRAD 100 can be configured using the ASCII terminal menu
system present in memory of the unit.

1

Turn on your PC connected to the Data Port of your MultiFRAD
and run Windows®.

2

Create a backup copy of your MultiFRAD software diskette before
you install the software.  Store the master diskette in a safe place
and install the MultiFRAD software using the backup copy.

3

Insert the backup disk for the MultiFRAD into the floppy drive.

4

Click on the File Menu in your Program Manager.

5

Click on Run.  The Run dialog box is displayed.

6

Type a:\install or b:\install (depending on the location of your
floppy disk drive) in the Command Line field, and then click on
OK.

7

The MultiFRAD 100 - Select Directories dialog box is displayed.

If you are installing the software from drive A and your Destina-
tion Directory is the default directory, click on OK to continue

8

The Installing MultiFRAD dialog box is displayed.