Fortress Technologies ecure Wireless Access Bridge User Manual

Page of 144
Fortress Bridge: Configuration
34
WPA and WPA2 generate encryption keys dynamically and 
exchange keys automatically with connected devices at user- 
specified intervals. This interval is the only additional setting 
required for WPA security. Specify the interval in seconds in the 
WPA Rekey Period
 field. Whole numbers between 
0
 and 
99999
inclusive, are allowed. A value of 
0
 (zero), disables the 
rekeying function; the keys used by connecting devices will 
remain unchanged for the duration of their sessions.
WPA-PSK, WPA2-PSK and WPA-Mixed-PSK Security
WPA-PSK (Wi-Fi Protected Access) and WPA2-PSK are the 
pre-shared key
 modes of these two WPA types (as 
distinguished from the 
enterprise
 modes described above). 
Pre-shared key mode differs from enterprise mode in that PSK 
bases its key generation on a user-specified key or 
passphrase.
You can specify that 
WPA-PSK
 or 
WPA2-PSK
 be used 
exclusively on a given VAP, or you can configure a single VAP 
to be able to use either (by selecting 
WPA-Mixed-PSK
), 
depending on the WPA-PSK type in use by the connecting 
device.
Like enterprise-mode WPA, WPA-PSK and WPA2-PSK 
generate encryption keys dynamically and exchange keys 
automatically with connected devices at user-specified 
intervals. Specify the interval in seconds in the 
WPA Rekey 
Period
 field. Whole numbers between 
0
 and 
99999
, inclusive, 
are allowed. A value of 
0
 (zero), disables the rekeying function; 
the keys used by connecting devices will remain unchanged for 
the duration of their sessions.
Additionally you must enter the 
WPA Preshared Key
 itself, in the 
form of either a plaintext passphrase between 8 and 63 
characters in length or a 64-digit hexadecimal string, and then 
use the radio buttons to specify whether the key is a 
Passphrase
 or a hexadecimal 
Key
.
3.3.4.6
Configuring Virtual Radio Settings
1
Log on to the Bridge GUI 
admin
 account and select 
INTERFACES
 from the menu on the left.
2
In the 
VIRTUAL
 
ACCESS
 
POINTS
 frame, click the 
Edit
 button for 
the VAP you want to configure.
3
Select and/or enter the values you want to set for the VAP. 
Your options are described in sections 3.3.4.1 through 
3.3.4.5).
4
Click 
Apply
 at the bottom of the screen.