Fluke Sewing Machine fluke123 User Manual
Fluke 123
Users Manual
Users Manual
38
Charging the Ni-Cd Battery Pack
At delivery, the Ni-Cd batteries may be empty and must be
charged for 4 hours (test tool is off) to fill them completely.
When fully charged, the batteries typically provide 4 hours
of use at full brightness and 5 hours at normal brightness.
charged for 4 hours (test tool is off) to fill them completely.
When fully charged, the batteries typically provide 4 hours
of use at full brightness and 5 hours at normal brightness.
When battery powered, the battery indicator on the bottom
of the screen informs you about the condition of the
battery. The battery symbols are:
of the screen informs you about the condition of the
battery. The battery symbols are:
.
The battery symbol
indicates that there are typically
five minutes of operating time left.
Use the setup as shown in Figure 2-1 to charge the battery
pack and power the instrument.
pack and power the instrument.
Turn the test tool off to charge the batteries more quickly.
Note
The test tool uses a trickle charge for the
batteries, so no damage can occur if you leave it
charging for long periods, e.g., through the
weekend.
batteries, so no damage can occur if you leave it
charging for long periods, e.g., through the
weekend.
Figure 2-1. Charging the Battery Pack