Fluke Sewing Machine fluke123 User Manual
Maintaining the Test Tool
Using and Adjusting 10:1 Scope Probes
2
41
7. Install a new battery pack.
Note
Ensure that the battery pack is placed in the
battery compartment as shown in Figure 2-2. Use
only the Fluke BP120 Ni-Cd battery pack.
battery compartment as shown in Figure 2-2. Use
only the Fluke BP120 Ni-Cd battery pack.
8. Reinstall the battery cover and secure the screw.
Using and Adjusting 10:1 Scope Probes
You need to adjust the red and gray scope probes
(PM8918, optional) for optimal response.
(PM8918, optional) for optimal response.
Warning
To avoid electrical shock use the BB120
Banana-to-BNC adapter (delivered with the
test tool) to connect a 10:1 scope probe to
the input of the test tool.
Banana-to-BNC adapter (delivered with the
test tool) to connect a 10:1 scope probe to
the input of the test tool.
To adjust probes, do the following:
•
Connect the 10:1 scope probe from the gray input B
jack to the red input A jack. Use the red 4-mm
banana adapter (delivered with the probe) and the
banana-to-BNC adapter (BB120). See Figure 2-3.
jack to the red input A jack. Use the red 4-mm
banana adapter (delivered with the probe) and the
banana-to-BNC adapter (BB120). See Figure 2-3.
Figure 2-3. Adjusting Scope Probes