Chief Patio Heater CMA-106 Leaflet

8803-000056 (Rev. C) 

1-800-582-6480  952-894-6280 FAX 952-894-6918 

2004 Chief Manufacturing 

8401 EAGLE CREEK PARKWAY, STE. 700 

www.chiefmfg.com

 

SAVAGE, MINNESOTA 55378  USA 

01/05 

 

I N S T A L L A T I O N       I N S T R U C T I O N S  

 

The Ceiling Plates are designed for ease of installation with any height of ceiling.  By using any length of 
standard NPT 1½” pipe threaded both ends, you can extend the height capabilities to meet your needs. 

WARNING:  IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!  

When mounting Chief Manufacturing accessories, the structural system and mounting method 
MUST be capable of supporting 5 times the combined weight of the total installation. 
The maximum weight to be installed on the ceiling plate is 50 pounds (22.7 Kg). 

 

Unpack and check contents: 

(1) Ceiling 

Plate 

(2) #10 

Fender 

Washer 

(2)  #10-32 Socket Screw 

(2)  #10 Lock Washer 

(1)  1/8” Hex Key 

(1) #10-24 x 1/4” Socket Screw 

(1)  3/32” Hex Key 

1.  Securely install the Junction Box Assembly, per manufacturer instruction. (SEE WARNING ABOVE). 

2.  Using the #10-32 screws, fender washers, lock washers and hex key provided, install ceiling plate (SEE 

DIAGRAM BELOW).  

3.  Install 1 ½” NPT into fitting and secure using #10-24 x 1/4” set screw. 

4.  Follow the Ceiling Mount Instructions for mating components or mounts 

#10-32 Socket Screw 

Lock Washer 

Fender Washer 

ceiling plate 

Not Included 

10-24 x ¼” Setscrew