CAT LEHE4651-04 User Manual

Page of 8
 
AUTOMATIC TRANSFER SWITCH
 
LEHE4651-04  
 
5
 
CTS SERIES ACCESSORY DEFINITIONS 
6P 
Microprocessor activated test switch (Momentary) 
6A 
Hardwired test switch (Maintained) 
6AP 
Microprocessor activated test switch (Maintained) 
6BK 
Hardwired test switch (Maintained Auto – Momentary Test) 
Key operated 
6CK 
Hardwired test switch (Maintained Auto – Maintained Test) 
Key operated 
A1 
Auxiliary Contact S.P.D.T. – Normal (Source 1) Failure 
A1E 
Auxiliary Contact S.P.D.T. – Emergency (Source 2) Failure 
A3 
Auxiliary Contact – closed in emergency (Source 2) Additional 
available (10 max.) on CTS Series and need to be specified 
A4 
Auxiliary Contact – closed in normal (Source 1) Additional 
available (10 max.) on CTS Series and need to be specified 
A62 
Motor disconnect and staged restart (1 contact) 
AB3 
Auxiliary contact – closed in bypass emergency (Source 2) 
(S.P.D.T.) (Standard up to 400A) Additional available (10 max.) 
on CBTS Series and need to be specified 
AB4 
Auxiliary contact – closed in bypass emergency (Source 1) 
(S.P.D.T.) (Standard up to 400A) Additional available (10 max.) 
on CBTS Series and need to be specified 
CALIBRATE 
Microprocessor activated calibration feature 
CDP 
Programmable exerciser daily, 7/14/28/365 days 
user-selectable, with or without load 
CDT 
Exerciser no load timer 
CTAP 
Chicago transfer alarm panel mounted in door of enclosure. 
Includes 3 aux. contacts and fuse. 
DS 
Disconnect Switch. Disconnects source voltage to transfer 
power panel. 
DT (DELAYED TRANSITION ONLY) 
Time Delay from Neutral Switch position to Source 2 
on retransfer 
DW (DELAYED TRANSITION ONLY) 
Time Delay from Neutral Switch position to Source 2 
on retransfer
 
Engine Start Relay 
EL/P 
Event log of last 16 events 
ETHERNET 
Ethernet Communication Adapter. Requires Modbus 
Communication Module. 

Fan contact, closed when engine runs. 
 
 
 
CT 
CTS SERIES ACCESSORY GROUP MATRIX
 
 
 
 
 
 
 
 
CTS SERIES ACCESSORY DEFINITIONS 
(continued) 
 
HT(1)(2) 
Heater and Thermostat 208/240V (1) 380/600V (2) 
mounted and 
inter-wired in enclosure. (requires larger enclosure for 
40-200A) 

Frequency Meter (Analog) – Door mounted 
K/P 
Frequency Indication on the controller 
LNP 
Center-off position LCD-Indicator 
L1 
LED light indicates Switch in Source 2 position 
L2 
LED light indicates Switch in Source 1 position 
L3 
LED light indicates Source 1 available 
L4 
LED light indicates Source 2 available