Chicco KEYFIT 30 User Manual

.Position Base.in.forward.facing.

vehicle.seat.with.Recline.Foot.
against.seat.back.

.Adjust Base Angle.by.pushing.

Recline.Buttons.while.lifting.Base...
Angle.is.correct.when.Bubble.is.
between.arrows.
.

Vehicle must be on a level surface for

the Bubble to indicate correctly.

.Route Vehicle Belt.through.

openings.in.Base.and.buckle.
the.vehicle.belt..(Do.not.put.the.
shoulder.belt.in.locked.mode.)

.Tighten Vehicle Belt.while.

pushing.Base.firmly.into.vehicle.
seat.
.

.Secure Vehicle Shoulder Belt.

firmly.into.Shoulder.Belt.Lockoff,.
while.keeping.tension.on.Belt..Only.
use.the.lockoff.on.the.opposite.
side.of.the.buckle.

...

INSTALLATION USING VEHICLE BELT

LATCH or Vehicle Belt? This Child Restraint can

be safely installed using Vehicle Belts or LATCH.

Use the method that results in the MOST

SECURE installation in your vehicle.

.CHECK Installation:

.Belts.MUST.be.TIGHT.

.Base.MUST.be.STABLE.

.Bubble.MUST.be

. . between.arrows.

.Belts.&.Buckles.MUST.NOT..

. . INTERFERE.with.attachment..
. . of.Carrier.to.Base.

.Attach Carrier To Base.after.

properly.securing.child.in.Carrier.

Uninstalling Base:
Remove.Carrier.from.Base,.
unbuckle.Vehicle.Belt,.and.remove.
Base.from.vehicle.

NEVER travel with Child Restraint unsecured in vehicle.

Passengers may be injured during a sudden stop or crash.

INSTALLATION USING VEHICLE BELT

If using Vehicle Lap Belt only

(no Shoulder Belt), make sure

that Lap Belt is LOCKED, and

that free end of Lap Belt is

neatly stored so it DOES NOT

INTERFERE with attachment

of Carrier to Base.

ALWAYS lift up on Carrier

to verify it is properly attached

to the Base.