American International Electric SEG-1 User Manual
4.2 Dynamic IP Address, non-expiring lease
No setup of the SEG via the serial port is required. Just supply the SEG's MAC address (the 12 digit number located on the label on
the SEG; for example 00-20-4A-52-F2-84) to the IT department and ask them to assign it an IP Address with a non-expiring lease.
Once you have the IP address that the IT department assigned to the SEG, enter that IP address into the Site Settings screen and save
the site.
the SEG; for example 00-20-4A-52-F2-84) to the IT department and ask them to assign it an IP Address with a non-expiring lease.
Once you have the IP address that the IT department assigned to the SEG, enter that IP address into the Site Settings screen and save
the site.
NOTE: Each SEG is shipped from the factory with an IP Address of 0.0.0.0. When the SEG is initially powered up (or rebooted) and
it has an IP address of all 0's, it will look for a DHCP server on the network and if one is found the SEG is assigned an IP Address.
it has an IP address of all 0's, it will look for a DHCP server on the network and if one is found the SEG is assigned an IP Address.
Page 20 of 34 Document Number: 6066005, Rev 3.2
Figure 5: Generate Security Key
Figure 6: Generate Security Key